Features:

• DiSEqC 2.0 support bi-directional DiSEqC full control functions

• Allow remote units to report their possible and actual configuration

• 4 satellite inputs selected by DiSEqC commands

• Support DiSEqC “standyby” commands

• 1 output for receiver with “DiSEqC” commands function

• Backwards compatibility with “Tone Burst”

• Impedance: 75Ω all ports.

• Connectors: "F" type female.

The DIGIWAVE DiSEqC switch will enable the user to select one LNB signal between 4 different LNBs of any type. The 4 input ports marked LNB1, LNB2, LNB3 or LNB4 are connected to the 4 LNBs, which may be on 4 different dishes, and the output marked RECEIVER OUT is connected to the receiver.

The selection of the LNBs is done by choosing the appropriate PORT A, B, C, or D in the menu of the receiver.

SPECIFICATIONS