HH120 Details

DMT-HH120 — Stab (Italy) HH120 Rotor for 1.2M Satellite Dish

Rotor SAT HH is a motor that enables any satellite dish to be pointed towards all visible satellites in the polar orbit. The characteristics that make Rotor SAT HH particularly valid are as follows:

Maximum precision
Mechanical robustness
Connection without external feeding, only by coaxial cable
Reduced dimensions

Maximum ease of installation Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers, where the rotation of the motor automatically begins when selecting the required channel. For all those receivers not provided with DiSEqC, STAB has developed the interfaces MS 220, MP 01, MP 02 to drive the motors only by TV cable.

SPECIFICATIONS
Operating Protocol	DiSEqC 1.2
Maximum Antenna Diameter	120 cm
Maximum Antenna Weight	17 Kg
Pole Support Diameter	50 – 76mm
Antenna Support Length	180 mm
Antenna Support Diameter	54 mm
Rotation Angle	±65 °
Rotation Speed	0.7°/s(18V); 0.4°/s(13V)
Operating Power Supply	13 / 18 VDV
Assorbimento in Stand-by	30 mA
Consumption in Stand-by Mode	190 mA
Consumption in Operating Mode	350 mA
Operating Temperature	-40°C ÷ +80°C
Maximum Relative Humidity	100%
Programmable Positions	49 satellites
Preset Positions	28 satellites
Connectors	F Type
Connection	Sat coaxial cable
Mechanical Limits	±70°
Software Programmable Limits	From 5° to 65°
Fine Tuning	Impulse 0,1°
Inclination On The Pole	From 15° to 70°
Weight	3.2 Kg