DGL-1189S Details

DGL-1189S — Linear & Circular Combo LNBF - Square Type

SETUP INSTRUCTIONS:

Using a 30-inch or larger dish, aim with the following settings:

For DGL-1189S you should setup as below will better:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)

LNB Power: ON
LNB Type: Universal
LNB Frequency: 9750Mhz/10750 MHz

Finally, do an AUTO SCAN or a BLIND SCAN

For DGL-1189D and DGL-1189Q you should setup as:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)

LNB Power: ON
LNB Type: Universal
LNB Frequency: 9750Mhz/10600 MHz

Finally, do an AUTO SCAN or a BLIND SCAN

SPECIFICATIONS
F/D Ratio	0.6	Input Freq. Range	11.70~12.75GHz (10.60/10.75GHz: 22K)
Gain Flatness	4dB over Band	Conversion Gain	45dB @ 25°
L.O. Freq.	10.60/9.75GHz	L.O. Stability	±1.0MHz @ 25° ±3.0MHz @ -40°~60°
Cross polarization Discrimination	60dB(min)	L.O. Phase Noise	-50dBc/1KHz -75dBc/10KHz -95dBc/100KHz
Noise Figure	0.5dB (Typ.)	Output Freq. Range	950~1950MHz (9.75GHz) 950~2150MHz (10.60GHz)
Band Switching Voltage	0/22KHz Tone	Output Connector	75Ω F-TYPE Female
Operating Temperature	-40°~60°	Polarization selection	V: 12V~14V DC H: 16~18V DC